Bostik Grip A310 Project Premier - 20 Kg

• The substrate must be sound, flat, smooth, permanently dry (not exposed to rising damp), clean, solid, degreased and dust-free.
• Scrape off: paints, traces of plaster, cement laitance, traces of old glues.
• Check the humidity of the substrates, which must comply with the DU of the chosen coating:
• For cement substrates, if the humidity is not compliant or in the case of paving on solid ground, apply our HYTEC E336 XTREM anti-damp barrier (technical opinion in force.)

APPLICATIONS

• GRIP A310 PROJECT can be applied by roller at a rate of 100 to 150 g/m²/layer.
• On a highly absorbent background, two passes may be necessary, spaced 1 hour apart.
• Allow to dry for 30 to 60 minutes depending on the porosity of the substrate and the ambient conditions during application.
• The dry primer should be covered no later than 24 hours after application.

MISCELLANEOUS NOTES

• Can be used indoors only.
• Fresh tools and stains can be cleaned with water.