Ezweld Cpvc Cement

Application:This cement is good for joining Schedule 40 & 80 PVC pipes and fittings up to 12” (30 mm) diameter interference fit. It is approved for hot (up to 180°F/82°C) and cold water pressure applications. It may also be used for non-pressure applications such as drain, waste, vent, sewer, gas, conduit, etc. For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like.  Always follow instructions on the label.

APPLICATION TEMPERATURE: 32° F — 110° F

STORAGE TEMPERATURE: 45° F — 110° F

The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.

Physical Properties

COLOR: SHELF LIFE: 3 years (unopened can)

Certification / Industry Listings

This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard F493 and D2846.